You are here: Home > Airsoft Tech Corner > AirRattle Tech Guides > > ZM51 Assembly
We found 0 results matching your criteria.

ZM51 Assembly Guide

Step 1: Locate the two screws pictured below. They will both have Philips heads.

Step 2: Gently remove the two grip pieces from the side of the stock as seen below

Step 3: Line up the stock with the body of the gun and slide the stock onto the body piece as shown below

Step 4: Insert the screws in the correct holes (Long screw on top, short screw on bottom) and screw them down

Step 5: Snap the grip pieces back on and its ready to go.